Update a board's firmware

Use this page to install or update the software on a sensor board (the small blue-and-black XIAO boards). You don't need any programming tools. It takes about a minute.

Loading build info…

What you need

Step by step

  1. Pick your board in the list below and tap its blue Download button. A small file ending in .uf2 is saved to your Downloads folder.
  2. Plug the board into the computer with the USB-C cable.
  3. Double-tap the small reset button on the board, like a double-click, quickly. A new drive named XIAO-SENSE pops up (like a USB stick). The board's light will pulse slowly.
  4. Drag the .uf2 file from your Downloads onto the XIAO-SENSE drive. (On Android, use the Files app: copy the file, then paste it into XIAO-SENSE.)
  5. Wait a couple of seconds. The drive disappears by itself and the board restarts. That means it worked. Don't unplug it before then.
  6. Check it: open a Bluetooth app on your phone and look for the board's name (shown on each button below). If you see it, you're done.

Which file for which board?

Pick by what the board does, not what it looks like. All the boards look identical, so put a piece of tape on each with its name when you finish flashing it.

If something goes wrong