Glove + Head + Gun Monitor

Glove + Head + Gun Monitor

glove: not connected
head: not connected
gun: not connected
Not calibrated
0.00 s
Hold the glove (or the gun, if it is your draw sensor) still, then tap Calibrate baseline.

Shot detectorglove firmware 1.5

shot: --

Gun sensorGunIMU firmware 2.0 on the rail

#TimeSplit sRecoil gRise °AxisSettle msSway mrad
No gun shots yet. Connect the gun sensor, then fire or dry fire.

Coach notesfrom the sensors, not from target hits

Draw scoreselected draw

Scoring targets

Angular rate baselinedrawhold

Head vs hand angular rateglovehead

Elevation of pointing axisdeg above level

Aim trace on holdmrad

Draw pathdrawholddots every 0.1 s

Draw avatarreplay of the selected draw: pointing axis and where it lands on a target 5 m away

Each draw appears here once you settle on target. Drag the picture to turn the view.

Draws this sessionsway in mrad

#TimeScoreDraw sHold sSway 1sSway allPeak °/sOver °Side °Elev °Head swayHead pitch °Shot g
No draws yet. Calibrate, then draw and hold on target.
Head pitch is how far your head tipped between just before the draw and the hold; negative means down. Head sway is in mrad over the last second of the hold. Sway is the angle your pointing axis wanders from its average direction, in milliradians (1 mrad = 1 mm at 1 m).